Loading ...
Loading ...
Loading ...
16
ENGLISH
4
Put the “INTENZA+” water lter into the empty water tank. Press it
down until it cannot move any further.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense all the water of the tank by using the hot water function (see
chapter “Hot water dispensing.
7
Remove the water tank, ll it with fresh water up to the MAX level. Put
it back into machine.
2
Remove the “INTENZA+” water lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
3
Set the “INTENZA+” water lter according to the hardness of the water
used:
A = Soft water
B = Hard water (standard)
C = Very hard water
Steady on
8
When the above steps have been completed, the “ “ light is shining
steadily.
Note:
We recommend you to replace the Intenza + lter every 2 months.
Loading ...
Loading ...
Loading ...