Loading ...
Loading ...
Loading ...
11
8. If the mixer has not been used for
5 minutes it will automatically change from
STANDBY mode to a power saving OFF
mode and the illuminated LED will switch
off. To exit OFF mode and begin mixing,
turn the dial to the selected speed or press
one of the count up/down timer buttons.
9. Do not turn the mixer on with the scraper
beater in place if the mixing bowl is empty.
This will cause the scraper beater to make
a loud noise as it scrapes the bowl.
10. When ingredients are in the mixing bowl,
the scraper beater may make a slight noise
as it scrapes the sides and bottom of the
bowl. This is normal and should not
cause concern.
11. Under heavier loads or extended mixing
time, the motor head may become warm.
This is normal and should not
cause concern.
Count-up timer
The count-up timer is for gauging mixing
time, making it easier to repeat the results.
Set the count-up timer using the arrow
buttons beside the LCD. The timer will
automatically begin counting up as
soon as the dial is turned to one of the
speed settings.
When the dial is turned to PAUSE, the
current mixing time will flash on the display.
When the dial is turned to OFF, the LCD will
reset back to 0:00.
The maximum count up time is 1 hour.
When the timer goes beyond 9:59, it counts
in whole minutes. Turn the speed control
dial back to OFF to reset.
Count-down timer
The count-down timer is for any recipe that
specifies the length of time ingredients
should be mixed.
To set the count-down timer, press the up or
down arrows until the desired mixing time is
displayed on the LCD screen.
Press and hold to scroll more quickly.
Rotate the dial to select the desired speed,
and begin mixing. When the timer has
finished counting down, it will beep.
The motor will automatically turn off and
the timer will flash OFF.
The control dial must to be rotated to the
OFF position to reset the timer and to
continue mixing.
Turn the speed control dial back to OFF
to reset.
Pause mode
At any stage during mixing (either
count-up or count-down mode), rotate the
speed control dial to PAUSE. This will turn
the mixer off and hold the current time on
the LCD.
Add additional ingredients as needed, and
turn the dial back to a speed setting to
continue as before.
Turn the dial to OFF to reset the timer.
Loading ...
Loading ...
Loading ...