Loading ...
Loading ...
Loading ...
19
Caring for Your Dryer
NOTE
If “Clean Filter” symbol is
displayed during the operation,
clean the filter promptly.
Care and Cleaning is Very Important
It’s not difficult to care for your dryer but it is
important that you do care for it. Follow the
instructions below.
Clean Filter
Clean the filter after each use and check it
before each use. It should also be cleaned if
the ‘‘Clean Filter’’ light becomes illuminated
and the buzzer sounds whilst the dryer is in
operation.
Cleaning or emptying the filter will reduce
drying times and energy consumption and
lengthen the dryer life.
1.Cool the dryer down and follow the above
steps.
2.Press the Start/Pause button.
CAUTION
- After washing the filter please dry
thoroughly.
- Lint must not be left to accumulate
in the dryer.
NOTE
A high atmospheric temperature and
a small room may both increase
drying time as well as energy
consumption.
CAUTION
If the laundry is not spun at a high speed
during washing, energy consumption
and drying time will increase.
In some instances, LED window may
display “ ” (Empty water symbol) and
the may stop because the water
container is full.
WARNING
Do not drink the condensed water.
1. Open the door.
1. Pull out the water
container.
2. Empty water
container in the
sink.
3. Push it back.
4. Press the
Start/Pause
button.
5. Close the door.
2. Pull the filter out.
3. Clean the filter by
using a vacuum
cleaner or rinsing
under the tap.
4. Replace the filter.
- Push the filter all
the way down to
avoid interference
with the door.
Empty Water Container
Condensed water is collected in the water
container.
Empty the water container after every
use.
Not doing so will affect the drying
performance.
If the water container is full, the “Empty
Water” lamp glows and the buzzer sounds
while the dryer is operating. If this should
occur, the water container needs to be
emptied within the next hour.
Loading ...
Loading ...
Loading ...