Loading ...
Loading ...
Loading ...
23ENGLISH
Displayed message Possible cause Remedy
FILL BEAN CONTAINER The coffee beans have run
out.
Fill bean container
INSERT BREWING UNIT The brewing unit has not
been replaced after clean-
ing.
Insert the brewing unit as
described in the section
“Cleaning the brewing unit”.
CLOSE DOOR The service door is open Close the service door.
GENERAL ALARM! The inside of the appliance
is very dirty.
Clean the inside of the
appliance thoroughly, as
described in the section
“Cleaning and mainte-
nance”.
If the message is still dis-
played after cleaning, con-
tact a customer services.
22. TROUBLESHOOTING
Problem Possible cause Remedy
The coffee is not hot The cups were not pre-
heated.
The brewing unit has
cooled down because 2/3
minutes have elapsed since
the last coffee was made.
The temperature set is too
low.
Warm the cups by rinsing
them with hot water.
Before making coffee,
preheat the brewing unit
by selecting the RINSING
function in the menu.
Change the set tem-
perature (see paragraph
“Changing coffee tempera-
ture”).
The coffee is not creamy
enough
The coffee is ground too
coarsely.
Wrong type of coffee
Turn the grinding adjust-
ment knob one click
anticlockwise towards “1”
while the coffee mill is in
operation.
Use a type of coffee for
espresso coffee makers.
The coffee is delivered too
slowly or a drop at a time.
The coffee is ground too
finely.
Turn the grinding adjust-
ment knob one click clock-
wise towards “7” while the
coffee mill is in operation.
Continue one click at a
time until coffee delivery is
satisfactory.
The effect is only visible
after delivering two coffees.
Loading ...
Loading ...
Loading ...