Loading ...
Loading ...
Loading ...
i: Changing the ISO Speed to Suit the Light LevelN
94
*1: Depends on the maximum ISO speed limit set.
*2: If fill-in flash will cause overexposure, ISO speed may be reduced, down to a
possible minimum of ISO 100.
*3: If bounce flash is used with an external Speedlite in a Basic Zone (except
<6>) mode or <d>, ISO 800 - ISO 1600 (or up to the maximum limit) will be
set automatically.
*4: Fixed at ISO 400 in <P> mode. If bounce flash is used with an external
Speedlite in <P> mode, ISO 400 - ISO 1600 will be set automatically.
*5: Fixed at ISO 400 if the maximum limit is ISO 400.
For ISO Auto, you can set the maximum ISO speed limit within ISO 400 -
ISO 6400.
Under the [z3] tab, select [ISO Auto],
then press <0>. Select the ISO speed,
then press <0>.
Shooting Mode ISO Speed Setting
A/7/C/3/4/5/P/6 Automatically set within ISO 100 - ISO 3200
d/s/f/a Automatically set within ISO 100 - ISO 6400
*1
2 ISO 100
With flash ISO 800
*2*3*4*5
With bulb exposures ISO 800
*5
3 Setting the Maximum ISO Speed for [AUTO]N
When [AUTO] is set, the ISO speed is indicated in whole-stop
increments. However, the ISO speed is actually set in finer increments.
Therefore, in the image’s shooting information (p.232), you may find an
ISO speed such as ISO 125 or ISO 640 displayed as the ISO speed.
In the <2> mode, an ISO speed other than ISO 100 may be displayed,
but the actual ISO speed used is the one shown in the table above.
Loading ...
Loading ...
Loading ...