Loading ...
Loading ...
Loading ...
Sets the motorized air discharge to oscillate, improv-
ing air circulation in the room. This function can be
activated from the remote only.
If air discharge is not closed by any operation,
please disconnect and reconnect the power cord.
SLEEP mode can be set in Cool, Dry, Fan operation
mode. This function gives you a more comfortable
environment for sleep.
The appliance will stop operation automatically after
operating for 8 hours.
Fan speed is automatically set at low speed.
This function can be activated from the remote only.
SWING
LED display shows the set temperature, fan
speed, or the selected TIMER delay.
Indicators will light to show active mode and
additional settings. The LED display will show the E5
to indicate when the internal water drain tank needs to
be emptied.
LED DISPLAY
TIMER
LG logo on front panel.
In COOL modes, the ▲/▼ buttons adjust the set tempera-
ture up to 86°F or down to 60°F, in one degree increments.
When the TIMER function is selected, use the ▲/▼ buttons
to adjust the delay time from 0 to 24 hours, in one hour
increments. If you press and hold the ▲/▼ buttons, the set
temperature or time will change automatically after a few
seconds.
NOTE: The displayed temperature is the SET temperature,
not the room temperature. In COOL mode, the thermostat in
the air conditioner will run the compressor until the set
temperature is reached, then cycle the compressor on and
off to maintain the set temperature.
12
Loading ...
Loading ...
Loading ...