Loading ...
Loading ...
Loading ...
Operating the appliance en
29
Program sequence
The programme status is indicated in
the display field.
Changing the program or
adding laundry
You can remove or add laundry and
change or alter the program at any time
during drying.
1. To pause the program, open the
dryer door or press the Start button.
2. Add or remove laundry.
3. Select another program or an
additional function, if required.
4. Close the dryer door.
5. Press the Start button.
Note: The program duration in the
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the program is changed or
the load is adapted.
Program interruption
The program can be interrupted at any
time; to pause, open the dryer door or
press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the program, you must
remove the laundry items and spread
them out so that the heat can disperse.
Program end
“Ÿš appears in the display panel.
Removing laundry and
switching off the dryer
1. Remove the laundry.
2. Turn the program selector to the "off"
position.
e.g.
1:27
Expected programme duration
in hours and minutes.
Note: When a programme is
selected, the expected drying
time for the recommended load
is displayed. During drying
moisture sensors detect the
remaining moisture in the load
and adjust the programme
length (except timed
programmes). This is visible via
the time remaining leaping
forward.
e Wet
ö Iron Dry
» Cupboard Dry
” AntiCrease
- ˜ -
Pause
“Ÿš End
Loading ...
Loading ...
Loading ...