Loading ...
Loading ...
Loading ...
The keep warm setting lies between and . It is used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the
effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched
on, the inside ring must be switched on.
Triple cooking zone Sensor panel Power indicator
To switch on the middle ring
Touch for 1-2 seconds
One power indicator is lit
To switch on the outside ring
Touch for 1-2 seconds
Two power indicators
are lit
To switch off the outside ring
Touch for 1-2 seconds
The second power indi-
cator goes out
To switch off the middle ring
Touch for 1-2 seconds
The first power indicator
goes out
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Control panel Display
Switch on
Touch (for 5 seconds)
Switch off
Touch
the previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm up function When setting a heat
setting using
, when starting from , the cooking zone switches to full power for a
certain amount of time and then automatically switches back to the heat setting set.
Control panel Possible heat settings Display
Switch on (only when
starting at
)
Touch
to (after 5 seconds)
Switch off Touch
to / to
Not used Touch
to to
If during the automatic warm up a higher heat setting is selected, e.g. from to
, the automatic warm up is adjusted.
If there is still residual heat on the cooking zone (display ), the automatic warm up is
not performed.
The length of time that the automatic warm up function operates depends on the heat setting
selected.
Heat setting Length of the automatic warm up [min:sec]
0:30
1:00
1:40
4:50
6 westinghouse
Loading ...
Loading ...
Loading ...