Loading ...
Loading ...
Loading ...
Accessing Ice and Reaching the Power
Switch
To reach the icemaker power switch and access Ice,
open the Ice box door located on the refrigerator door
and remove the bucket.
About the automatic icemaker. GEAppliances.com
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Icemaker
Feeler Arm
Power
Switch
Green
Power Light
To access ice.
Ice Bucket
Mullion
To reach the power switch.
Icemaker Accessory Kit
If your refrigerator did not come already equipped with an automatic icemaker, an icemaker accessory kit is available at extra cost.
Check the back of the refrigerator for the specific icemaker kit needed for your model.
12
Automatic Icemaker (on some models)
The icemaker will produce seven cubes per cycle—
approximately 100–130 cubes in a 24-hour period, depending
on freezer compartment temperature, room temperature,
number of door openings and other use conditions.
See below for how to access ice and reach the power switch.
If the refrigerator is operated before the water connection is
made to the icemaker, set the power switch in the O (off)
position.
When the refrigerator has been connected to the water supply,
set the power switch to the l (on) position. The icemaker power
light will turn green when the freezer light switch is pressed in or
when the freezer door is closed.
The icemaker will fill with water when it cools to 15°F (–10°C). A
newly installed refrigerator may take 12 to 24 hours to begin
making ice cubes.
You will hear a buzzing sound each time
the icemaker fills with water.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler arm, the
icemaker will stop producing ice. It is normal for
several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle multiple
times when making one batch of ice.
NOTE: Set the power switch to the O (off) position if
the water supply is shut off.
(Ice & Water Models)
To access ice.
Ice Bin
Shelf
To reach the power switch.
(Single Drawer Models)
Accessing Ice and Reaching the Power
Switch
To reach the icemaker power switch, pull the shelf
above the ice bin straight out, Always be sure to replace
the shelf.
To access ice, simply pull the bin forward.
Ice Bin
Shelf
Power switch
Lift and pull
Ice Box Door
Accessing Ice and Reaching the Power
Switch (Double Drawer Models)
To reach the icemaker power switch,
open the top freezer drawer and remove the full-width
basket. Always be sure to replace the basket.
To access ice, open the bottom freezer drawer. The ice
bucket is located below the mullio. Pull it foward to
access the ice.
Ice Bucket and Dispenser
• Pull up and out on the ice bucket to remove it from the
compartment .
• To replace the ice bucket, set it on the guide brackets and push until
the ice bucket seats properly.
• If bucket cannot be replaced, rotate the Ice Bucket Fork 1/4 turn
clockwise.
Extra Ice Storage
• There is additional ice storage in the freezer compartment drawer.
Loading ...
Loading ...
Loading ...