Loading ...
Loading ...
Loading ...
36
OPERATING INSTRUCTIONS (continued)
Using the HDTV Menu Screen
1. Make sure the physical connection is properly connected.
2. Switch on the TV.
3. Select the HDTV input on your TV by using the remote control.
4. If the PDP is moved to a different location. You should reset the receiver and do the channel scanning all over again.
USING THE HDTV ON-SCREEN DISPLAY (OSD) CONTROLS
1. Press DTT MENU on the remote control to display the MENU banner.
2. Use the ▲▼
W
X
to navigate to different menu item.
3. Use the
W
X
to adjust functions.
4. Press ENTER on the remote control to select functions. Press RTN to jump back the last page of menu.
5. Press RTN on the remote control to go to the last page; press EXIT to quickly exit from the menu.
HDTV Main Menu
Edit Channel TV Main List This is used to edit the channel from the TV channel list.
No Block
Block G and above
Block PG and above
Block M and above
Block MA and above
Block AV and above
Block R and above
Parental Guidance
Block All
Blocks selected HDTV-rating and all ratings below it.
(Enter the password to change setting).
Manual Scan
Search scan TV channel by channel number, frequency, bandwidth and
priority
Quick Scan Search scan TV channel by your location
Auto Scan Automatically search scan TV channel
Installation
Restore Defaults Sets HDTV back to default settings
Audio Setup Adjusts HDTV audio setting
Option Setup Adjusts HDTV OSD display setting
Change Pin To change password
General Setting
Local Time Sets your local time
System Status Shows the software version of your set
Loading ...
Loading ...
Loading ...