Loading ...
Loading ...
Loading ...
ENGLISH
15
ASSEMBLING AND PREPARING
Using the Kensington security system
y
Image shown may differ from your TV.
The Kensington security system connector is located at
the back of the TV. For more information of installation
and using, refer to the manual supplied with the Ken-
sington security system or visit http://www.kensington.
com.
Connect the Kensington security system cable between
the TV and a table.
y
The Kensington security system is optional. You
can obtain additional accessories from most
electronics stores.
NOTE
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed installation
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of the
TV.
When you install the TV using the wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1 Please, Use the screw and wall mount interface in
accordance with VESA Standards.
2 If you use screw longer than standard, the TV might
be damaged internally.
3 If you use improper screw, the product might be
damaged and drop from mounted position. In this
case, LG Electronics is not responsible for it.
4 VESA compatible only with respect to screw
mounting interface dimensions and mounting screw
specifications.
5 Please use VESA standard as below.
y
784.8 mm and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10
mm
y
787.4 mm and above
* Please use VESA standard wall mount pad and
screws.
Loading ...
Loading ...
Loading ...