Loading ...
Loading ...
Loading ...
Operating 29
Operating
3
Listening to music stored on the
Bluetooth devices (Secondary
unit)
Pairing your Secondary unit and a
BLUETOOTH device
1. Turn on the Secondary unit by switching
the Usage Mode Switch to PORTABLE. The
Bluetooth LED on SLAVE unit blinks with white.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG SJ7-2ND (XX)”.
y
XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG SJ7-2ND (08)” on your Bluetooth device.
y
Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
,
Note
3. When this unit is successfully connected, the
Bluetooth LED turns on white with beep sound.
If the connection is failed or disconnected, The
Bluetooth LED turns on white for 15 minutes
and change to red.
,
Note
4. Listen to music.
To play a music file stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide.
y
Bluetooth connection using the TV, PC or
dongle is not supported.
y
When you turn on the Secondary unit or
enter portable usage mode, the Secondary
unit requests a connection to the last
connected Bluetooth device.
y
If you want to connect another Bluetooth
device with the existing Bluetooth device
connected status, press and hold the
j
.on
Secondary unit. Then a beep sounds and you
can connect another Bluetooth device.
,
Note
Loading ...
Loading ...
Loading ...