Loading ...
Loading ...
Loading ...
Instructions for the installer
19
Installation with the flexible hose must be carried out so that the length of the
piping does not exceed 1.2 metres fully extended; make sure that the hoses do
not come into contact with moving parts and that they are not crushed in any
way.
6.7 Connection to liquid gas
Use a pressure regulator and make the connection on the gas cylinder following
the guidelines established by the regulations in force. Make sure that the feed
pressure complies with the values indicated in the table at point “9.2 Burner and
nozzle characteristics table”.
6.8 Room ventilation
Caution – This hob shall be installed in rooms with natural ventilation, as
required by standards regulations AS/NZS5601.
6.9 Combustion gas discharge
Combustion gases may be discharged by means of hoods connected to a flue
with reliable natural draught, or a fan extraction system. An effective extraction
system requires careful design by an authorised specialist, and must comply
with the regulation distances and positions. After installation, the engineer must
issue a certificate of compliance.
Loading ...
Loading ...
Loading ...