Loading ...
Loading ...
Loading ...
6
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
You can press and hold
at any time to pause the
function that is currently active.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking by pressing
.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
Opening the door during the preheating phase will pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want to reach
using the knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
To extend the cooking time without changing the
settings, turn the knob to set a new cooking time and
press
.
. AUTOMATIC FUNCTIONS
TEMPERATURE RECOVERY
If the temperature inside the oven decreases during a
cooking cycle because the door is opened, a special
function will be activated automatically to restore the
original temperature.
While the temperature is being restored, the
display will show a “snake” animation until the set
temperature has been reached.
While a programmed cooking cycle is in progress, the
cooking time will be increased according to how long
the door was open in order to guarantee best results.
DIAMOND CLEAN
To activate the “Diamond Clean” function, with the
oven cold, distribute 200 ml of water on
the bottom of the oven cavity, then close the oven
door.
Access special functions
and turn the knob
to select
from menu. then press to confirm.
Press
to start immediately the cleaning cycle, or
press
to set the end time/start delayed.
At the end of the cycle, let the oven colling down
and remove any residual water in the oven and start
cleaning using a sponge moistened with hot water
(cleaning could be compromised if delayed by more
than 15 minutes).
Please note: The duration and temperature of cleaning cycle
cannot be set
. KEY LOCK
To lock the keypad, press and hold
for at least 5
seconds.
Do this again to unlock the keypad.
Please note: The key lock can also be activated while cooking
is in progress.
For safety reasons, the oven can be switched o at any time
by pressing .
Loading ...
Loading ...
Loading ...