Loading ...
Loading ...
Loading ...
12 www.electrolux.com
Delay End Touchpad ( )
Time Manager ( )
This option allows you to adjust the wash
time. Press this touchpad repeatedly to
decrease or increase the wash time
according to the soil level of your wash.
Use the table below as a guide.
Prewash Touchpad ( )
Select this option if you wish your laundry
to be pre-washed before the main wash.
Use this option for heavy soil. The
indicator of this option comes on.
When selecting this option the laundry is
gently washed and spun to avoid
creasing. In this way ironing is easier.
The indicator of this option comes on.
Easy Iron Touchpad ( )
Select this option to add approximately
30 minutes of tumbling in vapour during
the wash cycle. Vapour helps open fabric
fibers up to allow laundry additives to
release tough stains. The indicator of this
option comes on.
Vapour Touchpad ( )
Vapour may not necessarily be visible
inside the drum during a vapour wash
cycle. Vapour is created below the
drum and allowed to naturally rise into
the clothes.
At the end of the Vapour cycle the
clothes will be warmer, softer and
detached from the drum.
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle you may
notice vapour exiting from the drain
hose of the washing machine, this
is normal and there is no cause for
alarm.
Vapour may not be present during the
entire vapour wash cycle.
Vapour function is more effective with
half load.
NOTE:
When you set this function, put the
detergent into the “ ” compartment.
This function increases the program
duration.
●
●
●
●
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum 1 hour
to maximum 19 hours.
If program duration is longer than 3
hours minimum Delay End option
starts from 4 hours.
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
Press the Delay End touchpad to choose
the end time as your wish. The display
shows the number of hours and the
indicator beside the touchpad is on.
For example, if the program duration of
your selected program is 3.20 hours and
you define the “Delay End” time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
3.20 hrs.2.40 hrs.
Working Cycle
“Delay End” Time : 6 hrs.
Pressed
Start/Pause
End of
Cycle
Start the
Program
Countdown
This option must be selected
after choosing the wash
program, and before pressing
the “Start/Pause” touchpad.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
set the washing machine to PAUSE by
pressing “Start/Pause” touchpad;
-
deselect this option by pressing “Delay
End” touchpad repeatedly till the
display shows delay time “ ”;
-
press the “Start/Pause” to start the
program.
-
Soil Level
Light Medium Normal Heavy
Wash Level
Loading ...
Loading ...
Loading ...