Loading ...
Loading ...
Loading ...
54
CLEANING THE SIDE BRUSH
Foreign objects/materials such as hair can easily adhere to the
side brush. Remove such materials at least once a week.
If excessive amounts of foreign materials are stuck to the brush,
there is the risk of damage to the brushes.
If the floor is rough or frequently cleaned, the side brushes may bend or become deformed. In this
case, use the following method to straighten the side brush.
1. Turn the main power switch at the rear of the
unit to Off (O).
2. Place the Robot Cleaner at the end of a table
to make cleaning the side brush easier. Make
sure that the Robot Cleaner is not in danger
of falling.
3. Soak the side brush in warm to hot water.
4. Press down on the side brush for about ten
seconds so that it is completely submerged in
the water.
5. Slowly wipe the side brush by sliding it through
your hand.
6. Rotate the side brush and repeat steps 4-6 for
each section of the brush.
7. Use the side brush only after it has completely
dried.
1. Use a screwdriver to remove the screws and
separate the side brush from the main unit.
2. Clean the brush and remove any trapped hair.
3. Insert screws and assemble the side brush with
the R and L markings on the brush and the
main unit aligned.
Side Brush Maintenance
1
3
5
7
2
2
4
6
1
Loading ...
Loading ...
Loading ...