Loading ...
Loading ...
Loading ...
839
Maintenance
Front windshield wiper blade
To inspect or replace the windshield
wiper blades and to prevent damag-
ing the hood, move the windshield
wiper blades to the service position
as follows;
After turning off the engine, move the
wiper switch to the single wiping
(MIST) position within 20 seconds
and hold the switch more than 2 sec-
onds until the wiper blade is in the
fully up position.
Type A
1. Raise the wiper arm.
2. Lift up the wiper blade clip. Then
pull down the blade assembly and
remove it.
3. Install the new blade assembly.
OJF075016
OHM078060
OHM078061
CAUTION - Wiper arms
• Do not allow the wiper arm to
fall against the windshield,
since it may chip or crack the
windshield.
• Do not pull wiper arm forward,
since arm could chip hood
paint.
Loading ...
Loading ...
Loading ...