Loading ...
Loading ...
Loading ...
Care and cleaning
Warning! Before maintenance,
deactivate the appliance and disconnect
the mains plug from the main socket.
Dirty filters and clogged spay arms
decrease the washing results. Make a
check regularly and, if necessary, clean
them.
Cleaning the filters
B
A
C
• Make sure that there are no residues of food or soil in or around the edge of the sump.
• Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides.
• Reassemble the filters (A) and (B).
• Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks.
An incorrect position of the filters can cause bad washing results and damage to the appliance
Cleaning the spray arms
Do not remove the spray arms. If the holes in the spray
arms are clogged, remove remaining parts of soil with a
thin pointed object.
External cleaning
• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning
pads or solvents.
Internal cleaning
• Carefully clean the appliance, including the rubber
gasket of the door, with a soft moist cloth.
• If you regularly use short duration program, these
can leave deposits of grease and limescale inside
the appliance. To prevent this, we recommend to
run long duration program at least 2 times per
month.
Troubleshooting
If the appliance does not start or it stops during
operation. Before you contact an Authorised Service
Centre, check if you can solve the problem by yourself
with the help of the information in the table.
With some problems, the display shows an alarm
code.
11
Loading ...
Loading ...
Loading ...