Loading ...
Loading ...
Loading ...
E
MOTOR SAFETY FILTER CLEANING
WARNING
Electrical Shock Hazard
Unplug power cord from electrical outlet.
Do not operate the vacuum cleaner
without the motor safety filler. Be sure the
filter is dry and properly installed to
prevent motor Failure and/or electrical
shock.
MOTOR SAFETY FILTER
Check motor
safety filter
frequently and
clean when dirty.
Remove the dust
bag as outlined in
the DUST BAG Filter
REPLACEMENT Motor Safety
section. FilteJ
If the filter, located in the bottom of the
dust bag chamber, is dirty, remove it by
pulling forward out from under the ribs.
Wash the foam filter in warm soapy
water, rinse and dry thoroughly by
squeezing the filter in your hand and
letting it air dry.
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace the foam filter by sliding it back
into place under the ribs in the dust bag
chamber.
Replace the dust bag as outlined in the
DUST BAG REPLACEMENT section.
1
EXHAUST FILTERREPLACEMENT
The HEPA exhaust filter must be replaced
when dirty, it should be replaced
regularly depending on use conditions.
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number.
1. Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out
from vacuum
cleaner.
2. Remove the
filter cartridge
from cover.
3. Place new filter cartridge into cover
making sure that airflow arrow on side of
cartridge points into cover.
Place foam seal of filter against the
vacuum cleaner body.
Filter Cover
Release Tab
Exhaust
Filter
Seat Against
Vacuum Cleaner
Body---,...
Exhaust
Filter
4. Replace the exhaust filter cover by
placing bottom tabs in slots and raising
cover up until it snaps into place
18
Loading ...
Loading ...
Loading ...