Loading ...
Loading ...
Loading ...
en Programme settings
26
--------
3 (ready in) ‚ - ƒ… Before starting the programme, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1. Select a programme.
The programme duration will be displayed for the selected
programme, e.g. ‚:…† (hours:minutes).
2. Press 3 (ready in) repeatedly until the required number of
hours is displayed.
Note: Use the 3 (ready in) + button to increase the set-
ting values, and the 3 (ready in) – button to reduce them.
3. Press Start A.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g. ‰) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note: The programme duration is included in the "Ready in"
time.
E.g.
\ ‹ : …‹
The drying time for timed programmes can be extended to up
to 3 hours 30 minutes in 10-minute increments.
Loading ...
Loading ...
Loading ...