Loading ...
Loading ...
Loading ...
General
WARNING - Do not use the heater until the castors or wall brackets are tted correctly. The heater
should be positioned observing the minimium clearances stated around the heater - see Fig.1,
Fig.2, Fig.4 and Fig.5.
The product can be used as an installed or portable unit. Once the desired application has been
decided upon and the requirements below have been met the product is ready to be used.
Simply plug in and switch on at the wall socket.
We recommend that the heater should be wall mounted in rooms where children may be left
unattended, see “Important Safety Advice“.
All models are splash proof to IP24 standard and may be used in bathrooms, however not in the
immediate vicinity of baths, showers, water connections, wash basins or swimming pools.
Model(s) Watt (kW) A (mm)
QRAD150 1.5 kW 756
QRAD200 2.0 kW 918
Wall Mounting
Portable
1. Remove wall mounting bracket from the back of the heater by depressing the spring latch at
the top of each bracket - See Fig.3.
2. Fix the wall bracket securely to the wall through the four screw holes provided.
3. Present the heater to the wall bracket, and engage lower slots in the back with bracket.
4. Raise the heater to the upright position and push the heater onto the bracket to engage top
latches.
1. Push the castors onto each of the feet as shown in Fig. 6.
2. Lay the heater on its front - See Fig.7.
3. Place the feet over the base of the heater, push the ribs into the slots and align the holes - See
Fig.8.
4. Secure each foot in position using screws into the back and base of the heater but do not
over tighten - See Fig.9.
Always ensure that the heater is stood on a rm, level base near to, but not directly beneath or
in front of, a suitable mains supply socket.
Dimensions
NEVER USE THE HEATER FREE STANDING WITHOUT BOTH FEET FITTED.
The castors are supplied as an accessory kit (Reference No: QRADCAS).
4
Loading ...
Loading ...
Loading ...