Loading ...
Loading ...
Loading ...
10
Door Open
If the door is open longer than 5 minutes, an alarm will sound
every 2 minutes until the door is closed or any control is pressed.
Lock Mode
The Lock mode deactivates all other options to avoid any
changes being made to your desired temperature settings.
To activate, press and hold LOCK for 3 seconds. After the
3-second countdown, all other displays will turn off and
become unavailable except Cool On, Cool Off, and Lock.
Over Temperature Alarm
NOTE: If the Over Temperature Alarm activates, your food may
spoil. See “Power Interruptions.” Minimize door openings until
temperatures return to normal.
The Over Temperature feature is designed to let you know when
the refrigerator temperature rises above 45°F (7°C) longer than
4 hours. The audio alarm will shut off automatically when the
temperature returns to normal, but the indicator light will continue
to flash until an Alarm Reset has been performed to let you know
that an over temperature condition occurred.
If the over temperature condition is still present when an Over
Temp reset is performed, the indicator light will continue to
reactivate every 4 hours until refrigerator temperatures are below
45°F (7°C) and 6°F (-14°C), respectively.
NOTE: These features will not appear on your control unless your
refrigerator is over temperature and the alarm requires a reset.
Showroom Mode
This mode is used only when the refrigerator is on display in a
retail store. If you unintentionally turn on Showroom mode, Cool
Off will light up on the display, and the controls will appear to
work. Exit Showroom mode by pressing and holding COOL ON
and SABBATH at the same time for 3 seconds.
REFRIGERATOR FEATURES
Glass Shelves
Remove and Replace the Shelf
1. Lift the front of the shelf up and away from the ledge on the
front of the shelf support.
2. Pull the shelf forward and lift it up and out of the shelf
supports.
3. Replace the shelf by inserting the back edge of the shelf
against the rear support in the back of the compartment.
4. Align the front of the shelf to the ledge on the front of the shelf
support.
5. Gently place the shelf into place.
DOOR FEATURES
Door Bin
Your refrigerator has two door bin locations for maximum storage
capacity.
Reposition the Door Bin
1. Remove the door bin by tilting it forward and pulling it out.
2. Replace the bin by placing the rear of the bin under the
support on the door and sliding into place.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
Loading ...
Loading ...
Loading ...