Loading ...
Loading ...
Loading ...
5
3. Remove insert panel
Using a Phillips screwdriver, remove the 4 screws securing
the insert panel to the outer door ring. Lift out the insert panel
and set aside.
5. Move ller plate
Grasp the tab on the ller plate and gently rotate outward while
lifting out until the locking clip disengages. Then align with the
opening on the opposite side and press down into place until
the locking clip engages.
4. Disengage inner trim ring from outer
door ring
Rotate the inner trim ring clockwise until the tabs disengage
from the retainers on the outer door ring. Then lift the window
assembly out of the door ring and set aside.
Tab
6. Rotate and reattach the outer door
ring to the inner trim ring
Rotate the inner trim ring 180° and lower it back into the outer
door ring, making sure the handle is on the same side as the
ller plate. Then rotate the window assembly counterclockwise
to engage the tabs in the retainers on the outer door ring.
NOTE: It may help to hold the outer door up so that the inner
trim ring ts completely down into the outer door ring.
7. Reinstall insert panel
Lower the insert panel onto the outer door ring. Using a Phillips
screwdriver, secure with the 4 screws removed earlier.
Now proceed to “REVERSING THE HINGE.”
Filler plate
Loading ...
Loading ...
Loading ...