Loading ...
Loading ...
3
2. Lift out inner door panel
Lift out inner door panel and set aside.
4. Move ller plate
Grasp the tab on the ller plate and gently rotate outward while
lifting out until the locking clip disengages. Then align with the
opening on the opposite side and press down into place until
the locking clip engages.
5. Rotate window assembly
Rotate the window assembly 180°.
3. Disengage window assembly from
outer door ring
Rotate the window assembly clockwise until the tabs disengage
from the retainers on the outer door ring. Then lift the window
assembly out of the door ring and set aside.
Tab
6. Rotate insert panel
Lift the 2 tabs of the insert panel off the 2 plastic pins
on the window. Rotate the insert panel so that the at part
of the opening is to the bottom, then slide the tabs down onto
the 2 pins, as shown.
7. Reattach the outer door ring to the
window assembly
Lower the window assembly into the outer door ring, making
sure the window is the top (squared-off end) of the outer door
ring. Then rotate the window assembly counterclockwise to
engage the tabs in the retainers on the outer door ring.
NOTE: It may help to hold the outer door up so that the window
assembly ts completely down into the outer door ring.
Now proceed to “REVERSING THE HINGE.”
Filler plate
Loading ...
Loading ...
Loading ...