Loading ...
Loading ...
Loading ...
Safety features
38
Overheat protection
All the induction coils and the cooling
elements for the electronics are equip‐
ped with an overheating protection
mechanism. To prevent the induction
coils and cooling elements from over‐
heating, the overheating protection
mechanism works on the affected
cooking zone or on the entire cooktop
in the following ways:
Inductive coils
– Any booster function in operation will
be turned off.
– The power level that is set will be re‐
duced.
– The cooking zone turns off automati‐
cally. flashes in the timer display
alternatingly with .
You can use the cooking zones again
as usual when the fault message has
gone out.
Cooling elements
– Any booster function in operation will
be turned off.
– The power level that is set will be re‐
duced.
– The cooking zones turn off automati‐
cally.
The affected cooking zones can only be
used again if the cooling element has
cooled down to a safe level.
Overheating can be caused by:
– Heating empty cookware
– Fats or oils being heated at high
power settings
– Underside of cooktop insufficiently
ventilated
– A hot cooking zone being turned on
after a power outage
If, despite elimination of the cause, the
overheat protection is triggered again,
contact Miele Service.
Loading ...
Loading ...
Loading ...