Loading ...
Loading ...
Loading ...
Operation
25
Basic operation
The ceramic cooktop is equipped with
electronic sensor buttons that react to
finger contact. During activation, the
On/Off sensor button muss be
pressed somewhat longer than the oth‐
er buttons for safety reasons.
Each reaction of the buttons is ac‐
knowledged with an acoustic signal.
The cooking zones and the timer have
to be "active" when you want to set or
adjust a power level or the duration. To
activate the zone or the timer, tap the
selection button of the corresponding
zone or the timer. After the selection
button is tapped, the corresponding
zone or timer indicator light will flash.
While the indicator light is flashing, set
or adjust the power level or the dura‐
tion.
Exception: If there is only one cooking
zone in operation, you can set or adjust
the power level without activating it
first.
Malfunction due to dirty and/or cov‐
ered sensor buttons
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the cook top (see
"Safety switch-off"). Hot cookware
on the sensor buttons/indicator
lights can damage the connected
electronic module.
Keep the sensor buttons and indica‐
tor lights clean, do not place any ob‐
jects on them, and do not put hot
cookware on them.
Loading ...
Loading ...
Loading ...