Loading ...
Loading ...
Loading ...
23
ping through the holes of the steam head, raise the steam hose occa-
sionally to remove condensation inside.
• Be careful at all times.
TROUBLESHOOTING
Problems Possible causes Solutions
There is no
steam.
The appliance has
not been turned
on.
Check that the device has been
plugged in correctly. Next
press the On/Off pedal, the
power indicator light located at
the front of the device will
come on.
The hose has
been obstructed.
Check that the hose is not bent
or twisted.
There is no water
left in the water
tank.
Switch off the device and fill
the water tank.
The steam flow
is low.
Your steamer has
a build-up of scale
because it has not
been rinsed out
regularly.
See descaling process
(Cleaning paragraph).
The hose has
been obstructed.
Check that the hose is not bent
or twisted.
Water runs
through the
holes of the
steam head.
There is
condensation in
the hose.
Never use a steamer in the
horizontal position. Hold the
hose vertically outstretched
and wait for the condensed
water to return to the steamer.
The steamer
takes a long
time to heat
and/or ejects
white particles.
Your steamer has
a build-up of scale
because it has not
been descaled
regularly.
See descaling process
(Cleaning paragraph).
If it is not possible to establish the cause of the problem, seek the assis-
tance of an approved ROWENTA Service Center www.rowenta.com
1800124023 IS6200 US_110X154 22/09/11 10:20 Page23
Loading ...
Loading ...
Loading ...