Loading ...
Loading ...
Loading ...
21
Crease attachment
• Remove the fabric brush. Completely slide the hook
of the accessory into the slot located in the lower part
of the steam head.
• Push on the handle to open the crease attachment.
• Place the garment between the crease attachment and
steam head.
• Release the handle.
• Starting at the top of the garment, move the crease at-
tachment in a downwards motion.
• Once unit is unplugged and completely cooled down,
remove the crease attachment by sliding it off of the
steam head.
Lint pad
The lint pad removes hair, lint and animal fur for a professional finish.
• To use the lint pad, slowly brush the clothing with the grain or nap of
the fabric.
• The pad can be cleaned by brushing it in the opposite direction. We re-
commend cleaning the pad on an old cloth that can be discarded.
AFTER USE
• After using the garment steamer, switch off the device by pressing the
pedal once again. The power indicator light will go off, and you can then
unplug the device.
• Hang the steam head in an upright position on the hook when not in use.
• Empty and rinse the water tank each time before storage in order to flush
out any scale particles. (fig.15)
• Loosely wind up the electrical cord and close with the Velcro strip, then
hang it from the clip on the pole. (fig.16a, 16b)
• Do not carry the steamer by the water tank handle. This appliance includes
luggage style wheels for added convenience when transporting.
The lint pad is a separate accessory and cannot be attached to the steam
head.You can use the lint pad independently from the steamer.
Warning: Never touch the steam head until it has cooled down
completely.
1800124023 IS6200 US_110X154 22/09/11 10:20 Page21
Loading ...
Loading ...
Loading ...