40958 User Manual

Loading ...

Fig. 3a Fig. 3b

Fig. 3c

OPERATING INSTRUCTIONS

1. Remove the battery cover from the back of the remote

found in remote pack (O). Insert the battery from remote

pack (O) into the remote; ensure polarity of battery

matches the polarity indicated in the battery compartment

-- positive (+) to positive (+) and negative (-) to negative

(-). Replace the battery cover and press the fan power

button on the remote to ensure the LED indicator

illuminates and the remote turns on the fan.

Note: If remote doesn’t turn on the fan, see

TROUBLESHOOTING (page 17).

2. To operate the fan using the remote, press and release

the following buttons:

1 - High fan speed

2 - Medium fan speed

3 - Low fan speed

4-FanPower-Turnsthefano󰀨.

Light Delay O󰀨 mode - Press and hold the fan power

button(4)forveseconds,whichwillturno󰀨light

after one minute. The LED indicator on the remote will

ashfourtimestoconrmmodesetting.

5 - Light Control:

Incandescent Bulbs - Press light control to turn

lightso󰀨andon.Pressandholdlightcontroltodim

or brighten the lights.

CFL Bulbs -Turnsthelightsonando󰀨.Note: The

dimmer function does not work with CFL bulbs.

6 - D/CFL Switch: Switch should be set to “D” to

correspond with the included LED, which will enable

the dimming function. Flip to “CFL” if you change to

corresponding bulbs.

3. Using a ceiling fan will allow you to raise your thermostat

setting in summer and lower your thermostat setting in

winterwithoutfeelingadi󰀨erenceinyourcomfort. Note:

Wait for the fan to stop before moving the reverse switch

located on switch housing (F).

In warmer weather, push the reverse switch to the

down to display a sun icon, which will result in downward

airowcreatingawindchille󰀨ect(Fig.3a).

In cooler weather, push the reverse switch to the up

todisplayasnowakeicon,whichwillresultinupward

airowthatcanhelpmovehotairo󰀨theceilingarea

(Fig. 3b).

Important: The reverse switch must be set either

completely up or down in order for the fan to function

correctly. If the reverse switch is set in the middle

position, the fan will not operate (Fig. 3c).

LEARN

Remote

Front Back

Battery

Cover

Battery

Compartment

LED

Indicator

Loading ...

User Manual - Page 15