Loading ...
Loading ...
Loading ...
12
FINAL INSTALLATION
4. Install the blade arm (L) to the underside of the motor
(E) with motor screws (V) previously removed (Step 7,
page 9). Tighten with Phillips screwdriver.
Repeat for each blade arm (L).
Note: If you wish to install the fan without the light kit,
proceed to Step 10.
5.Toinstallthelightkit,rstremovetheswitchhousing
screws (S) preassembled to the switch housing cap
(G). Then, connect the single-pin connectors from
the switch housing (F) and switch housing cap (G) --
blue to black and white to white.
6. Align the notch in the switch housing cap (G) with the
reverse switch located on switch housing (F). Then
assemble the switch housing cap (G) with light kit (H)
to the switch housing (F) using the previously removed
switch housing screws (S).
6
H
S
4
L
E
V
G
S
F
F
G
5
Notch
Single-pin
Connectors
Reverse
Switch
Loading ...
Loading ...
Loading ...