Loading ...
Loading ...
Loading ...
English 26
Maintenance
Replacing an Oven Light
9 WARNING
• Make sure the appliance and lights are cool and
power to the appliance has been turned off
before replacing the light bulb(s). Failure to do
so could result in electrical shock or burns.
• The lenses must be in place when using the
appliance.
• The lenses serve to protect the light bulb from
breaking.
• The lenses are made of glass. Handle carefully
to avoid breaking. Broken glass could cause an
injury.
• Light socket is live when door is open.
Bulb specifications:
Oven Width Bulb
Description
Bulb Image
27 inch
800 HBN Series
Ovens
25 Watt,
25WPRE14,
European base
30 inch
800 HBL Series
Ovens
40 watt,
appliance bulb,
standard
Edison base
To change the bulb:
1. Turn off power to the
oven at the main
power supply (fuse or
breaker box).
2. Remove the glass
cover by unscrewing
it. Turn the glass
counterclockwise to
remove it.
3. Remove the bulb. The
bulb unscrews
counterclockwise.
4. Grasp the new bulb
with a clean, dry cloth
to prevent depositing
skin oils on the glass
which could lead to
premature bulb failure.
Replace the bulb by
screwing it in turning
the bulb clockwise.
5. Screw the glass cover
back on.
6. Turn power back on at
the main power supply
(fuse or breaker box).
Stainless Steel
Surfaces
Always wipe or rub in the direction of
the grain. Clean with a soapy
sponge, then rinse and dry, or wipe
with Fantastik® or Formula 409®
sprayed on a paper towel. Protect
and polish with Stainless Steel
Magic® and a soft cloth. Remove
water spots with a cloth dampened
with white vinegar.
Do not use any abrasives such as
steel wool pads, Softscrub®, or
BonAmi©.
Chlorine or chlorine compounds in
some cleaners are corrosive to
stainless steel. Check ingredients on
label before using.
Plastic &
Controls
When cool, clean with soapy water,
rinse and dry.
Do not use any abrasives such as
steel wool pads, Softscrub®, or
BonAmi©.
Probe Wipe with soapy water. Do not
submerge. Do not wash in the
dishwasher.
Printed Areas
(Words and
Numbers)
Do not use abrasive cleansers.
When cool, clean with soapy water,
rinse, dry.
Part Recommendations
Black Stainless
Surfaces
For black stainless steel and anti-
fingerprint surfaces, use a soft, dry
towel. For stubborn dirt, use warm
water diluted with a non-abrasive,
mild cleansing soap. Never use
stainless steel polish.
Loading ...
Loading ...
Loading ...