Loading ...
Loading ...
Loading ...
28
Activating the Split mode from the video input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• The speaker icon can be shifted left and right by pressing the and SELECT buttons. The audio of
the video will be output from the side on which the speaker icon is located.
• The same video input mode cannot be selected for both screens at the same time.
• Pressing the MULTI PICTURE button again will cancel the 2 pictures display.
• Refer to the table for 2 pictures (Split) mode.
Activating the MULTI PICTURE mode from the RGB input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input.
• The speaker icon can be shifted left and right by pressing the and SELECT buttons. The audio of the
video will be output from the side on which the speaker icon is located.
• The sub-screen position can be selected up and down by pressing and SELECT buttons.
• The sub-screen can be selected with the AV1AV6, TV channel buttons from the status that the speaker
icon appears on the left side of AV✱ etc. as shown in the diagram to the right.
• Pressing the MULTI PICTURE button again will cancel the 2 pictures display.
• "Frequency Mode" in the Setup Menu should be set to Movie when sub-screen is the component signal of
1080i/50 or 1080i/60.
AV1: Displays the VIDEO input signal of the sub-screen.
AV1 AV2
RGB2
AV1
(Sub-
screen)
Main Sub
Sub 1
Sub 2
Sub 3
Main
NOTE
• Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the mode will not change
to power save mode.
• Please be careful since image retention will occur if display is left in a multi picture display state for a long period of time.
2 Pictures (Split)
Input terminal
AV1
AV5
AV1, AV2, AV6 RGB1 RGB2
Sub
Main
AV1
AV5
RGB1
RGB2
AV1
AV2
AV6
TV
PAL, SECAM
NTSC3.58/4.43
576i, 576p
480i, 480p
1080i/50
1080i/60
720p/60
STB
Component
TV
PAL
SECAM
NTSC3.58
NTSC4.43
576i
576p
480i
480p
1080i/50 1080i/60
720p/60
STB
Component
TELE
TEXT
4 Pictures
Input terminal
AV1
AV5
AV1, AV2, AV6 RGB1 RGB2
Sub
Main
AV1
RGB1
RGB2
AV1
AV2
AV6
TV
PAL, SECAM
NTSC3.58/4.43
576i, 576p
480i, 480p
1080i/50
1080i/60
720p/60
STB
Component
TV
PAL
SECAM
NTSC3.58
NTSC4.43
576i
576p
480i
480p
1080i/50 1080i/60
720p/60
STB
Component
TELE
TEXT
( : Available)
Teletext is available only for TV
( : Available)
OPERATING INSTRUCTIONS (continued)
Displaying MULTI PICTURE (continued)
Loading ...
Loading ...
Loading ...