Loading ...
Loading ...
Loading ...
6
EN
Connecting the water drain hose
1. Pull hose in the product by hand in order to
disconnect it from where it is connected. Do not
use any tools to remove the hose.
2. Connect one end of the drain hose supplied
separately with the product to the connection point
from where you removed the hose of the product
in previous step.
3. Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
A
Hose must be fixed in every type of connection.
Your house will be flooded if the hose comes loose
during water discharge.
C
Water drain hose should be attached to a height of
maximum 80 cm.
C
Make sure that the water drain hose is not stepped
on and it is not folded between the drain and the
machine.
Adjusting the feet
In order to ensure that the product operates more
silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting
the feet.
Turn the feet to left or right until the machine stands
level and firmly.
C
Never remove the adjustable feet from their
housings.
Electrical connection
Connect the product to a grounded outlet protected
by a fuse complying with the values in the "Technical
specifications" table. Our company shall not be liable
for any damages that will arise when the product is
used without grounding in accordance with the local
regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after
installation.
• The voltage and allowed fuse or breaker protection
are specified in the “Technical specifications”
section. If the current value of the fuse or breaker
in the house is less than 10 Amps, have a qualified
electrician install a 10 Amp fuse.
• The specified voltage must be equal to your mains
voltage.
• Do not make connections via extension cables or
multi-plugs.
• The main fuse and switches must have a contact
distance of minimum 3 mm.
B
Damaged power cable must be replaced by the
Authorized Service Agent.
B
If the product is faulty, it must not be operated
unless it is repaired! There is the risk of electric
shock!
First use
Before starting to use the product, make sure that
all preparations are made in accordance with the
instructions in sections "Important safety instructions"
and "Installation".
Disposing of packaging material
Packaging materials are dangerous to children. Keep
packaging materials in a safe place away from reach of
the children.
Packaging materials of the product are manufactured
from recyclable materials. Dispose of them properly and
sort in accordance with recycled waste instructions. Do
not dispose of them with normal domestic waste.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove the water drain (if any) and chimney
connections.
3. Drain the water in the product completely.
A
We recommend carrying the product in upright
position. If it is not possible to carry the machine in
the upright position, we recommend carrying it by
tilting towards the right side when looked from the
front. After the product is moved to its new place,
you should wait for 12 hours before starting it.
Disposing of the old product
Dispose of the old product in an environmentally friendly
manner.
Refer to your local dealer or solid waste collection centre
in your area to learn how to dispose of your product.
For children's safety, cut the power cable and break the
locking mechanism of the loading door so that it will be
nonfunctional before disposing of the product.
Loading ...
Loading ...
Loading ...