Loading ...
Loading ...
Loading ...
17
EN
Adding/removing laundry in standby
mode
In order to add or take out laundry after the start-up of
the programme;
1. Press the “Start/Pause/Cancel” button to switch the
machine to “Pause” mode. Drying process will
stop.
2. Open the door at Pause position and close it again
after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the
program.
C
Any laundry added after the drying process was
started may cause the already dried clothes in
the machine intermingle with wet clothes and the
result will be wet laundry after the drying process
is over.
C
Laundry may be added or taken out as much
as desired during a drying process, but as this
process will interrupt drying continuously, it will
extend the program duration and increase energy
consumption.
Therefore, it is recommended to add laundry
before the drying programme has started.
C
If you select a new programme by turning the
programme selection knob while your machine is
in standby, then the current program is cancelled
and new programme information is displayed.
Child-proof lock
There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all button
except the “On/Off” button on the panel are deactivated
when the child-proof lock is active.
In order to activate the child-proof lock, press on
the “audio warning” and “anti-creasing” buttons
simultaneously for 3 seconds.
To start a new programme after the programme is over
or to interrupt the programme, the child-proof lock
should be deactivated. Press the same buttons for 3
sec. again to deactivate the child-proof lock.
Lock symbol will appear on the screen when the child-
proof lock is activated.
C
Child-proof lock will also be deactivated when the
machine is restarted by pressing the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the position
of programme selection knob is changed while the
machine is running or in halt.
• If the child-proof lock is deactivated after changing
the position of the programme selection knob while
your machine is running, your machine stops and
new programme information is displayed
Ending the programme through
canceling
A new program can be selected and started after
“Program cancel” is activated in order to change the
drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for about 3 seconds.
“Lint filter cleaning” and “Water tank” warning symbols
light up and “End” label appears on the screen as a
reminder at the end of this period.
A
As the inside of the machine will be excessively hot
when you cancel the program while the machine is
running, activate the ventilation program to cool it
down.
C
If you change the position of programme selection
knob while your machine is running, then the
machine stops, current programme is cancelled
and new programme information is displayed.
End of programme
“Filter cleaning” and “Water tank” warning symbols
light up and “End” label appears on the screen in the
programme follow-up indicator when the programme
ends. The door can be opened and the machine
becomes ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C
When selected, the 2-hour anti creasing
programme will be activated to prevent laundry
from creasing if you do not take the laundry out
after the programme has come to an end.
C
Clean the filter after each drying (please see, Filter
cleaning).
C
Drain the water tank after each drying (please see,
Water tank)
Loading ...
Loading ...
Loading ...