Loading ...
Loading ...
Loading ...
17
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the setting:
1 Press the [On/Off] button.
2 Hold down the “A” button (see page 15) and press [Start] until the display indicates “H:0x” (x can
be any number).
3 Release both buttons.
4 Press the “A” button until the display indicates “P:0x”.
5 Press the “C” button until the display corresponds with your requirements.
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
6 Press [Start] to save the setting.
Child Lock
1 Start the desired cycle.
2 Hold down the “B” button (see page 15) for approximately 3 seconds until the display reads “CL”.
3 The “CL” will be indicated now if any button is pressed and the program will not be reset.
To deactivate the child lock, hold down the “B” button for approximately 3 seconds until the display no
longer reads “CL”.
Aquastop® Leak Protection
Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps
out water to avoid contact with the floor. It works 24/7 and can turn itself on.
Loading ...
Loading ...
Loading ...