Loading ...
Loading ...
Loading ...
8
Temperature Controls
Built-In Refrigerators
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display between
Fahrenheit and Celsius, press Display Mode °C/°F.
The temperature display shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature will vary
from the set temperature based on factors such
as door opening, amount of food, defrost cycling
and room temperature.
NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.
To turn off the cooling system in both the
freezer and fresh food compartments, press
either (+) pad until both displays show OFF.
To turn the cooling system on, press either (-)
pad. The preset temperatures of 0°F and 37°F
will appear in the display.
To check the current temperature setting
for the fresh food or freezer compartment,
press the (+) or (-) pad once. After 5 seconds, the
display will return to the actual temperature.
To change the temperature settings, press the
(+) or (-) pads to desired temperature set point for
fresh food and freezer separately. Allow 24 hours
for the refrigerator to reach the temperature you
have set.
Temperature Ranges
Low High
Fresh Food
Freezer
NOTE: Setting the controls to OFF stops cooling,
but does not shut off electrical power to the
refrigerator.
34°F
1°C
–6°F
–21°C
42°F
5°C
+4°F
–15°C
Door
alarm
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will come
on. To turn it off, press it again.
2QPRGHOVZLWKDGLVSHQVHUWKH'RRU$ODUP
feature is located on the dispenser panel on the
front of the freezer door.
When the DOOR ALARM is active, the alarm will
flash and beep if you keep the door open for
more than 2 minutes.
3UHVHW6HWWLQJV
Allow 24 hours to reach these preset temperatures.
Dispenser Models
Non-Dispenser Models
Loading ...
Loading ...
Loading ...