Loading ...
2
Installation Instructions
3
INSTALL THE PEDESTAL
TO THE WASHER OR DRYER
A
Place the pedestal against the bottom
of the unit. Check to be sure the drawer front
is at the front of the unit.
B
Align the holes in the pedestal with
the holes in the bottom of the unit.
Use a Phillips screwdriver to install
the 4 screws through the pedestal
DQGLQWRWKHXQLW³GRQRWWLJKWHQ
C
Slide the pedestal toward the unit,
until it is aligned front to back. Use an
8 mm socket wrench to securely tighten the
screws.
2
PREPARE THE PEDESTAL
A
Pull the
drawer out
as far as it
will go.
B
Remove screws
from drawer
slides. Slide
drawer out of
the base and set
aside.
C
Do not remove
the foam blocks
on the top of the
pedestal.
FOR DRYERS ONLY:
D
Locate the 4 support pads from the parts
package. Each pad has 2 protrusions that fit
into the holes on top of the pedestal. Press the
rubber pads into each set of corner holes on
the top of the pedestal as shown.
NOTE: The support pads should be installed on
the dryer only. DO NOT INSTALL THESE PADS ON
THE WASHER PEDESTAL.
Loading ...
Loading ...
Loading ...