Loading ...
Loading ...
Loading ...
22
CLEAN
2. Press the start time keypad. The “:” in the time of
day display will ash.
3. Press and hold the keypad to scroll to the time to
start a delayed self-clean cycle. Release the keypad
when the desired start time is displayed.
4. Press the clean keypad. “---” appears in the display.
5. To start press the or keypad once. “3:00” will
appear in the display indicating that a 3 hour self-clean
time is set. To change to a shorter 2 hour self-clean
time press the keypad once (“2:00” will appear in
the display indicating a 2 hour clean time is desired).
Once the oven control is set for clean, the motor
driven lock will begin to automatically lock the oven
door. The “door locked” indicator light will ash
while the oven door is locking. DO NOT open the
oven door while this indicator light is ashing (allow
about 15 seconds for the oven door to completely
lock).
Stopping or interrupting a self-clean cycle
If it becomes necessary to stop or interrupt a self-
cleaning cycle once it has been activated:
1. Press the clear off keypad.
2. Once the oven has cooled down (about 1 hour) and
the “door locked” indicator light has turned off, the
oven door may be opened.
3. If needed, the self-clean may be restarted.
To start a self-clean cycle immediately without delay,
skip steps 2 & 3 in the instructions provided below.
Setting a self-clean cycle or a delayed start
self-clean cycle
IMPORTANT
When the self-clean cycle has completed:
1. The time of day will appear in the oven display and
the “clean” and “door locked” indicator lights will
continue to glow.
2. Once the oven has cooled down for about 1 hour and
the “door locked” light has turned off, the oven door
may be opened.
6. “CLn” will appear in the oven display during the self-
clean cycle and the “door locked” indicator light will
remain ON until the self-cleaning cycle is complete or
cancelled and the oven temperature has cooled.
NOTES
CAUTION
Setting a self-clean cycle
• To avoid possible burns use care when opening the
oven door after the self-cleaning cycle is nished.
Stand to the side of the oven when opening the
oven door to allow any hot air or steam to escape.
• DO NOT force the oven door open. This can damage
the automatic door locking system. Use caution and
avoid possible burns when opening the oven door
after the self-cleaning cycle has completed. The oven
may still be VERY HOT.
• Whenever the clean feature is active you may check
the amount of time remaining in the self-clean cycle
by pressing the clean keypad once. Remember the
oven door will not unlock until the range has cooled
sufciently. You will need to add about 1 hour to
the time displayed before you can use the oven for
cooking again.
• After the oven has completely cooled and the
oven door has unlocked, wipe away any residue or
powdered ash from the oven interior using a damp
cloth or paper towel.
1. Remove all items from the oven, cooktop, and all oven
racks from the oven and be sure the oven door is
completely closed. Be sure the oven control displays
the correct time of day and adjust if needed.
NOTE
Loading ...
Loading ...
Loading ...