Loading ...
Loading ...
Loading ...
14
SETTING OVEN CONTROLS
Setting the clock
When the appliance is rst plugged in or when the power
supply to the appliance has been interrupted, the display
will ash “12:00”. It is recommended to always set
the clock for the correct time of day before using the
appliance.
NOTE
Changing oven temperature display (°F or
°C)
The electronic oven control is set to display °F
(Fahrenheit) temperatures by default when shipped from
the factory.
To change the temperature to display °C (Celsius)
or from °C to °F (control should not be set for bake
or clean when setting this feature):
1. Press broil keypad. “— —” appears in the display.
2. Press and hold the until “HI” appears in the
display.
3. Press and hold broil keypad until °F or °C appears in
the display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control keypad to return to normal operating
mode.
Setting a silent control panel
A beep will sound each time a control keypad is pressed.
If desired, the control may be programmed for silent
operation.
Press and hold the start time keypad. After 7 seconds,
the control will beep once then release keypad.
This will block the controls from sounding when a keypad
is pressed in the future.
To turn the silent control panel feature off, press and hold
start time keypad again for 7 seconds until the control
beeps once.
Changing between continuous bake setting
or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on
for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for continuous
baking.
Changing to continuous bake setting:
1. Press and hold timer on-off keypad for 5 seconds
until a tone sounds, “ — — hr” will appear in display
for continuous cooking. The current time of day will
return to the display.
2. To cancel the continuous bake setting, press timer
on-off keypad and hold for 5 seconds until a tone
sounds. “12hr” will appear in display indicating that
the control has returned to the 12-Hour Energy Saving
feature.
To set the clock:
1. Press clock set once (do not hold keypad down).
2. Within 5 seconds, press and hold the
or until
the correct time of day appears in the display.
The time of day cannot be changed when the oven or
clean is active.
Changing between continuous bake or the 12-Hour
Energy saving modes will not change how the cooktop
controls operate.
NOTE
NOTE
The temperature display (°F or °C) feature cannot be
changed when the oven or clean is active.
Loading ...
Loading ...
Loading ...