DFN38450X Instruction Manual

Loading ...

Lme traces reman on dshes and glassware gans a msty appearance

• Rnse ad s not suffcent. >>> Check the rinse aid indicator and add rinse

aid if necessary. Increase the rinse aid setting if there is enough amount

of rinse aid in the machine.

• Water hardness settng s low or salt level s nsuffcent >>> Measure the

hardness of the supply water appropriately and check the water hardness

setting.

• Salt leakage exsts. >>> Pay attention not to spill salt around the salt fil-

ling hole while adding salt. Make sure that the salt reservoir lid is tightly

closed after finishing the filling process. Run the prewash programme to

remove the salt that spilled inside the machine. Since the salt granules

that will remain under the lid will dissolve during prewash, causing the lid

loosen, check the lid once again at the end of the programme.

There s a dfferent odour n the machne

C A new machne has a pecular odour. It wll fade out after a couple of was-

hng.

• Flters are clogged. >>> Check if the filter system is clean. Clean the filter

system regularly as illustrated in section "Cleaning and Care".

• Drty dshes are kept n dshwasher for 2-3 days. >>> If you are not going

to start the machine right after you have put the dishes into it, remove

the remnants on the dishes and run the Prewash programme without de-

tergent every 2 days. In such cases, do not close the door of the machine

completely in order to avoid odour build up in machine. You can also use

commercially available odour removers or machine cleaners.

Loading ...

Instruction Manual - Page 42