Loading ...
Loading ...
Loading ...
33
EN
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions.
2. Once you press the Time Delay
key, Display Information Line
will show "0:30" and Time Delay
indicator will start flashing.
3. Set the desired time by pressing
the Time Delay key. Time will
increase with increments of 30
minutes up to 6 hours and after
that in 1 hour increments up to 24
hours every time you press the
key.
4. Press Start / Pause / Cancel key
to start countdown for the Time
Delay. Time Delay indicator and
Start / Pause indicator will light
continuously until the end of the
period. Time Delay is displayed
on the Display Information Line.
Selected programme will start as
soon as the countdown is over.
Changng the settngs whle Tme
Delay functon s enabled
Whle the Tme Delay functon s
actvated, you cannot make changes
n the washng programme, auxlary
functons or the duraton of delay
tme.
C Programme and auxiliary
functions cannot be set/changed
after the programme has started.
To cancel the Tme Delay functon
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. When the Start / Pause / Cancel
key is pressed and hold, "3", "2", "1"
appear on the Display Information
Line. Time Delay indicator will turn
off at the end of the cancellation
process and delaying process is
cancelled.
C You can select and start a
new programme following
the cancellation of Time Delay
function.
C Time Delay function can not be set
after the programme starts.
Startng the programme
To start your machne after selectng
the programme and auxlary
functons, press Start / Pause / Cancel
key.
Once the programme starts a
tune s played and the estmated
tme remaned to the end of the
programme wll appear on the Dsplay
Informaton Lne. Start / Pause
/ Cancel ndcator starts lghtng
contnuously.
C Your machine performs water
softening depending on the
hardness level of the supply water.
Remaining time displayed towards
the end in some programmes
can be dierent from the time
indicated at the beginning due to
this process. The total time can
also change while the programme
is running depending on the
ambient temperature where your
machine is installed, temperature
of the supply water and amount of
the dishes.
C Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing
Start / Pause / Cancel key if you
have to open the door. Then, open
the door of the machine. There
may be a rush of vapour when you
open the door of your machine;
be careful. Close the door of your
machine and press Start/Pause/
Cancel key again. Programme will
resume running.
Loading ...
Loading ...
Loading ...