Loading ...
Loading ...
Loading ...
23
USA
Sanitize Function
Sanitize function raises the water
temperature in the final rinse to
meet the requirements of NSF/ANSI
STANDARD 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments.
C
At the end of a succesfull
sanitization “S“ is displayed
on the display. “S” is not
displayed on the display if
the cycle is interrupted or the
water could not be heated to
the required temperature.
C
Available programs are
indicated on Program Table
chart.
C
Note: Only sanitizing cycles
have been designed to meet
the requirements of NSF/
ANSI Standard 184 for soil
removal and sanitization
efficacy.
There is no intention, either
directly or indirectly, that
all cycles have passed
sanitization performance
tests.
Automatic Detergent Detection
Feature
The product has a feature to
automatically detect the type of the
detergent and adjust the washing
programe and drying system to the
best performance. If special tablet
detergent is used, the programe
duration can be extended by 20
minutes in order to optimize the
washing and drying performance.
C
Notice: Automatic detergent
detection feature should be
deactivated during the tests
according to AHAM DW-1.
To deactivate:
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Keep them
pressed until the countdown 3, 2, 1
is completed on the display.
2. Press P+ key to activate the
a: option. Automatic detergent
detection feature is disabled at
“a:0” option and enabled at "a:1"
option. Set the desired option by
pressing the Time Delay key.
3. Turn off the machine with On/Off
key to save the changes.
Loading ...
Loading ...
Loading ...