Loading ...
Loading ...
Loading ...
74
uuIndicatorsu
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
System Message
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Comes on along with a beep when a
problem is detected. A system
message on the i-MID appears at the
same time.
●
While the indicator is on, press the
(display/information) button to see the
message again.
●
Refer to the Indicators information in
this chapter when a system message
appears on the i-MID. Take the
appropriate action for the message.
●
The i-MID does not return to the normal
screen unless the warning is canceled,
or the button is pressed.
—
Turn Signal and
Hazard Warning
Indicators
●
Blink when you operate the turn
signal lever.
●
Blink along with all turn signals
when you press the hazard warning
button.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs P. 383, 385
—
High Beam
Indicator
●
Comes on when the high beam
headlights are on.
— —
Lights On
Indicator
●
Comes on whenever the light switch
is on, or in AUTO
*
when the exterior
lights are on.
●
If you remove the key from the ignition
switch
*1
while the exterior lights are on,
a chime sounds when the driver's door
is opened.
—
Fog Light
Indicator
*
●
Comes on when the fog lights are
on.
— —
* Not available on all models
Loading ...
Loading ...
Loading ...