Loading ...
Loading ...
Loading ...
Residentia\12
Control Panel
1. Delay Button: Use this button to set the delayed washing start time.
2. Delay Window: Displays the delayed start time (1-24 hours) and fault codes.
3. Option Button: Use this button to select an additional option to that of your
washing program (i.e. Half Load or Extra Dry).
4. Rinse aid warning light: This indicator shows when the the Rinse Aid
dispenser needs refilling.
5. Program Indicators: Displays which wash program you have selected.
6. Program Button: Use this button to select your desired wash program (i.e.
Heavy, Normal, 1 Hour, etc).
7. Power Indicator: Indicates when the power is switched on.
8. Power Button: To turn the dishwasher on/o.
9. Half Load Indicator: This indicator shows when the half load indicator is
switched on. Note: The Half Load option can only be used with selected
wash programs (i.e. the Rapid program cannot be used with half load).
10. Extra Drying Indicator: This indicator shows when the extra dry option
has been selected. When used, the dishwasher will use an increased
temperature during the final rinse to maximise the drying. Note: This does
involve a slight increase to the energy consumption.
Filling the rinse aid dispenser The rinse aid is released during the final rinse to prevent water from forming
droplets on your dishes, which can leave spots and streaks. It also improves
drying by allowing water to roll o the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next
to the detergent dispenser. To fill the dispenser, open the cap and pour the
rinse aid into the dispenser until the level indicator turns completely black. The
volume of the rinse aid container is about 110ml.
Warning! Only use specific "Rinse Aid" branded products and never
fill the rinse aid dispenser with other substances and they
may damage the dishwasher.
— If there is no rinse-aid warning light in the control panel, you can judge the
amount of rinse-aid by the color of the optical level indicator "C" located
next to the cap. When the rinse-aid container is full, the whole indicator will
be dark. As the rinse-aid diminishes, the size of the dark dot decreases. You
should never let the rinse aid get below 1/4 full.
\Operating Your Dishwasher\
Loading ...
Loading ...
Loading ...