Loading ...
Loading ...
Loading ...
Error code What it means… What to do…
Communication Error
If you see this icon displayed (electronic
display models) or the
top temperature
icon is flashing it means that the control
has lost contact with the main
control board.
The appliance will operate at its last
known setting, all auxiliary functions will
not work.
Turn the unit off at the power point for 5
minutes and then turn it
back on.
Under most circumstances this will reset
the display enabling normal function to
continue.
If the error re-occurs then call
for service.
Sensor
– Open Circuit /Short Circuit
If you see this icon displayed (electronic
display models) or a
ny combination of
the second and fourth temperature icons
are flashing it means that an error has
been detected on a sensor.
The refrigerator will run in a default cycle
to prevent food spoilage.
Call for ser
vice.
Alarm Icon What it means Operation
Freezer Te
mperature Alarm
(Except Single door freezer)
Activates if the freezer temperature
is 10°C over set temperature for a
period of 50 minutes (except during
a defrost).
An alarm will sound the temperature
icons will flash.
To deactivate the alarm for 50 minutes press
any button.
To deactivate alarm for 12 hrs on the ice &
w
ater model press and hold Select Mode for
10 seconds for non ice and water models
press and hold any button for 10 seconds.
All Freezer Model
Door Alarm
Activates if the refrigerator or
freezer doors are left open for
longer than
2 minutes.
An alarm will sound the affected
compartment icon will flash and the
temperature and icons will fade on
and off.
• Alarm will sound and icon will flash
ind
icating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes while
the door is open press any button (the
icons will continue to flash until door is
closed).
ERROR CODES & ALARMS
Alarms
Error codes
21
Loading ...
Loading ...
Loading ...