Loading ...
Loading ...
Loading ...
To replace the drawer:
1. Ensure the telescopic slides are pushed in all the
way.
2. Slide the drawer into place over the slides and push
the bin in until it stops.
3. Drop drawer into position.
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all
the way then lift bin out from the front of the bin. When
refitting insert the rear of the bin first then lower into
position.
When replacing the bins after cleaning, we recommend
fitting the lower bin first.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side
of the freezer.
NOTE: This is only possible on top mount models.
1. R emove the ice bin and ice cube tray. If the ice tray
assembly is frozen to the carriage, simply squeeze the
tray and shelf together to break the ice.
2. Before you remove The ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the
front of the shelf,and removing it from the rear.
USING YOUR REFRIGERATOR (CONTINUED)
Insert into the slot at the rear of the shelf Then engage into the front of the shelf
1. Refit the runner into the rear of the shelf on the
right hand side and then engage the front.
2. Fit the carriage by sliding it into the runners until
the front if the carriage engages with the shelf.
3. Refit the ice tray and ice bin.
WARNING
Fill the ice cube tray with potable water only.
CAUTION
LED lighting
Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED
lights should be serviced by the manufacturer.
Refer to the warranty page for contact details.
16 electrolux.com.au
Loading ...
Loading ...
Loading ...