Loading ...
Loading ...
Loading ...
23
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc.|
> Basic Manual
Setting Item Default Value Setting Details
Subwoofer 0 dB After selecting the speaker frequency from
between "31 Hz" and "250 Hz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
This cannot be selected if "No" is set in
"System Setup" - "Speaker" - "Configuration" -
"Subwoofer".
•
The result may not be as expected depending on the input source and listening mode setting.
•
If you want to make the adjustments while listening to something, press
on the remote controller,
and select the Preset you want to adjust in "AV Adjust" - "MCACC" - "Manual EQ Select" first.
MCACC Data Check
You can check the number of speaker channels connected and the content and values you
have set for each of the speaker settings.
■ Speaker Setting
You can check the number of speaker channels connected and the large and small settings
you have set for the low range reproduction capabilities for each of the speakers.
■ Channel Level
You can check the output level settings for each of the speakers.
■ Speaker Distance
You can check the distance from each speaker to the listening position.
■ Acoustic Calibration EQ
You can check the calibration values for the frequency characteristics of each speaker that
were set in "Manual MCACC".
Loading ...
Loading ...
Loading ...