Loading ...
Loading ...
Loading ...
21
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc.|
> Basic Manual
The image on the screen changes as you choose the number of channels in "Speaker
Channels", so refer to it when performing the settings.
3. Test tones are emitted by the speakers, and firstly the unit detects the speakers
connected and the noise in the environment.
4. After the results of the measurements are displayed, select "Next", press ENTER on the
remote controller, and the test tones are emitted again, and the unit automatically makes
settings such as the optimum volume level and the crossover frequency.
5. When the measurement is completed, the measurement result is displayed.
Press the cursors
/ on the remote controller to check the settings. Press ENTER
when "Save" is selected to save the settings.
6. Disconnect the speaker setup microphone.
Manual MCACC
■ EQ Adjust
If you perform Full Auto MCACC then settings are automatic, but you can also adjust the
output volume of the range of each connected speaker to suit your own preferences. You
can adjust the volume of the different sound ranges for each of the speakers. You can set
three different equalizers in Preset 1 to 3. You can select up to 4 bands for the Subwoofer
and 9 bands for all other speakers.
Setting Item Default Value Setting Details
Front Left 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Center 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Front Right 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Loading ...
Loading ...
Loading ...