Loading ...
Loading ...
Loading ...
esatto.house15
Troubleshooting
FURTHER PROBLEM SOLVING
SAFETY RESET
1. These dryers have a safety cut out switch which is activated by temperature.
2. The safety reset button is on the backboard. If your dryer not heating this button must be reset
before the dryer will operate again. You may need to wait 10 minutes for cooling to occur.
3. The most common reason for the dryer to overheat is a blocked lter. Clean the lint lter after each
load to prevent overheating of the dryer.
It will only be necessary to press the safety reset button if the dryer not heating. Allow the dryer at least
10 minutes to cool down before pressing the button .Press the white button in until you feel the reset
click. Cleaning the lter after each load will avoid repetitive operation of the safety cut out switch.
The cut out switch may operate for the following reason:
1. Lint lter is blocked.
2. Exhaust outlets blocked at the back of the dryer.
3. Poor ventilation in the laundry or room-open a window or door
4. Lightweight garment eg. Handkerchief, sucked over the lter.
Safety Reset Button:
Use your nger or a pencil to press the button in until you feel it click.
Service agent required to repair
temperature fuse
Loading ...
Loading ...
Loading ...