Loading ...
Loading ...
Loading ...
Instructions for the User
17
8. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals,
bulbs, and so on. The following instructions describe how to carry out these minor maintenance
operations.
WARNING
ELECTRICAL SHOCK HAZARD
Before any intervention, disconnect the power supply of the device.
8.1 Replacement of oven light bulbs
Remove upper oven protection A and ring B as well as the glass cover C, unscrewing it anticlockwise.
Replace light bulb D. Reassemble ring B, cover C and upper protection A.
CAUTION: The standard bulbs are halogen: do not touch them directly with your fingers. Use
insulation to protect your hand. Use only bulbs that are available at authorized service centers.
8.2 Removing the door
Use the two splines provided
Open the door, insert the splines G (provided) into the slit of the hinges and push them towards the oven.
Half-close the door upward to form an angle of approximately 45°, then lift up and slide off.
For re-assembly, insert the hinges into its groove then let the door rest downwards and extract splines G.
Use two screwdrivers
Open the door and fit the screwdrivers into the hinge holes from the inside.
Half-close the door upward to form an angle of approximately 45°, then lift up and slide off.
For re-assembly, insert the hinges into its groove then allow the door to rest downward and remove the
screwdrivers.